How to adjust the ventilation of the rice dryer?
Release time:
2021-12-25
Regularly check whether the drain valve of the rice dryer is flexible, whether the materials are unblocked, whether the triangular cone and the feed nozzle are in close contact, and whether the balance cone is in the proper position.
How to adjust the ventilation of the rice dryer? Many users have already answered such questions to us, because considering the seriousness of this problem, we have specifically summarized the methods that can solve this problem through technical means, as described below.
1. Regularly check whether the drain valve of the rice dryer is flexible, whether the materials are unblocked, whether the triangular cone and the feed nozzle are in close contact, and whether the balance cone is in the proper position. In order to prevent the flash from moving under strong vibration, we can align it with the lower nozzle and fix it on the joystick. At the same time, add oil to the shaft oil cup in time and change it once or twice per shift.
2. To ensure a good seal of the bearing parts, please pay attention to the air leakage between the discs. When using the sand dryer, please strictly manage the materials to be dried and prevent large slag, stones, iron wire and other debris from entering, which may cause strong wind or even hinder the discharge or blockage.
the use of rice dryer matters:
3. During the working process of the rice dryer, it is not allowed to store too much material on the baffle, which will affect the discharge, and the stored volume cannot be too small to cause frequent vibration, so please be sure to observe the baffle valve. The amount of material and the size of the blanking interval are compatible with the discharge speed of the rice dryer.
1. Normally, the dryer must be installed in accordance with the standard. Provide customers with free basic construction drawings to assist customers in smooth production. Understandably, many companies do not communicate with equipment installations when working with manufacturers. After purchasing a rice dryer, the tilt angle is usually caused by the installation. The purpose is to increase the output, but the fact is that it has no effect. Instead, the flow rate of the material in the barrel is accelerated and the drying time per unit time is reduced. The drying quality is reduced, which is not conducive to the stability of the material, and increases the power consumption, thereby increasing the cost.
2. The temperature control of the hot air will also affect the production effect of the rice dryer. It can be said that the hot air temperature directly determines the drying efficiency. Under the same unit of high wind speed and high temperature, the drying speed is faster. This requires the operator to have rich operating experience and theoretical experience to fully understand the working principle of the rice dryer.
Overhaul is a problem that needs to be paid attention to regularly in equipment production. The dryer has disadvantages. Easy to block high viscosity materials. If you encounter such problems, you should contact the technician to clear the card in time. Therefore, the inner material greatly improves the stability of the rice dryer.
The ventilation of the rice dryer must not go wrong, because if there is a problem, it will cause huge losses. Therefore, it is necessary to know how to adjust the ventilation of the rice dryer through technical means. I hope every user of the rice dryer can understand that this is an effective way to increase the income of the rice dryer!
Previous: Maintenance of drying equipment
Next: What problems should be paid attention to when replacing the heat exchanger of the hot blast stove?
More Blog
Dried to Perfection: The Magic of a Food Dehydrator
Discover the benefits and uses of a food dehydrator in your kitchen. Learn how to preserve food the right way!
2025-09-23
The Marvels of Food Dehydration: A Flavorful Journey
Discover the fascinating world of food dehydration, its benefits, and how it's changing the food industry.
2025-09-01
Dehydrating the Future: Innovative Case Studies in Food Dehydration
Explore fascinating case studies in food dehydration, showcasing how this process enhances flavors and extends shelf life.
2025-08-29
Working together, we'll grow your business.
yunfen industrial dehydrator：85296705519
+8613658089808：8613658089808
E-mail：mike@scyftech.com
Hotline：+86 16603578295